MILUX HIGH PRESSURE REGULATOR KEPALA SHJ | M268F

Genuine parts from Milux Malaysia.

WITH RM1,000,000.00 PRODUCT LIABILITY INSURANCES COVERED
Connection : Ø20mm (inlet)
Inlet Pressure : max 0.05- 1.0Kpa (0.5-10 bar)
Outlet pressure : 0 ~0.2 kpa (0~ 2 bar)
Rate Flow: 0-0.6 Kpa (0-6 bar)
Package weight : +/- 370g 
Usage: For Commercial Use Only (High Presure)
Usage: For Normal Liquefield Petroleum Gas Only
100% fit to Malaysian gas cylinders.

Certification :
S.N.I. (Indonesia National Safety Standards)
SIRIM (Malaysia Safety Appliances Department)
With SAFETY VALVE
1 MONTH WARRANTY
SIRIM APPROVED
MADE IN MALAYSIA
ORIGINAL PRODUCT
READY STOCK
FAST DELIVERY

Before using the regulator, please read the instruction carefully

𝐂𝐀𝐔𝐓𝐈𝐎𝐍𝐒

• Use only for L.P Gas only.
• Use only approved hose and hose clips to fix the regulator and appliance
• Do not disconnect from the gas cylinder while the appliance is still in use (alight) this action can cause serious fire accident.
• Do not expose the regulator direct to hot or cold weather condition.
• In case of any leak do not switch "ON" or "OFF" electric switches or light any matches or lighter, or any other source of flame.
• Please use soap water to detect the leak.

𝐎𝐏𝐄𝐑𝐀𝐓𝐈𝐍𝐆 𝐈𝐍𝐒𝐓𝐑𝐔𝐂𝐓𝐈𝐎𝐍

• Place regulator onto the cylinder valve with the knob pointing downwards.
• To lock the device to the cylinder turn the knob clockwise to 9 o'clock position.
• To supply the gas, turn the knob to 12 o'clock position.
• To cut off gas, turn the knob anti-clock wise to 9 o'clock position.
• To disconnect the device from the cylinder, turn the knob anti- clockwise to 6 o'clock position.